ADR EMF Shield
The ADR EMF Shield is a ceramic disc you place around the home and office to reduce symptoms from exposure to electromagnetic (EMF), microwave, geopathic and other negative fields in the surrounding environment. Specifically, use the ADR Shield for the home, office or outdoor locations.
The ADR EMF Shield uses patented ADR Technology dielectric composites to absorb and disperse a wide range of frequencies, including the most common household 50 and 60 Hz.
Placing the ADR Shield directly above an alternating field source will give the best results. The same is equally true if you place the ADR EMF Shield over geopathic sources, like water veins running beneath the home or office.
What Are Alternating Electromagnetic Fields?
Before the 20th century, the prime causes of low frequency electromagnetic fields were from natural phenomena. For example, electrical storms, underground water veins and the movement of tectonic faults create these types of fields. During electrical storms, the after-effects were the rapid decay of foods like meat and milk.
During the last century, however, the rapid technological development of electromagnetic and electronic devices has increased the levels of electromagnetic pollution in our environment. Undoubtedly the increasingly high levels of “electronic smog,” poses a danger to the quality of life in our daily lives.
Today, man-made alternating electromagnetic fields, especially in cities, are over 100,000 times higher than the Earth’s own natural field. The ADR EMF Shield strongly absorbs low frequency electric fields. Further, the ADR Shield’s range of effectiveness helps reduce symptoms affecting plants, animals, and humans.
By placing ADR EMF Shields properly in our environment, including apartments, homes, offices and other structures, we harmonize the surrounding energy.
Instructions for Your ADR EMF Shield
The ADR EMF Shield provides a general coverage of 1,100 sq. feet.
Since EMF and geopathic fields are not only horizontal but also vertical, placing an ADR EMF Shield on each floor of the home will increase its benefits.
Place ADR EMF Shields in areas where there is strong electrical activity. For example, place an ADR Shield over the fuse box, or over the wires of computer electronics, audio and other strong emitting electronic devices.
You can place the ADR EMF Shield in the bedroom because it’s important to allow for a natural sleep free from the effects of electronic interference. If you have sleep issues, I recommend using the ADR TEX EMF Mat.
The ADR Shield is simple to use. Just place the disc under the bed, on top of an electrical nest or power box, or in the closet. For those that are correcting geopathic zones outdoors, bury the disc in the desired location. Often discs are placed into the foundation of a new home construction.
Once fruits and vegetables are picked, they continue to lose vital enzymes, vitamins and life-force. To keep food fresh longer, minimizing loss of nutrients, place an ADR Shield in the refrigeration. If you want to recharge your water and foods, I recommend using the ADR Revitalizer Plate.
The ADR EMF Shield works passively in the background and has an effective range of 1,100 sq. ft.
It’s possible in a multi-story structure you may require more than one ADR Shield to maximize benefits. In other words, you may need one on the main floor, the upper floor, and basement. I offer an ADR EMF Shield Smart Saver Deal. You buy 5 Shields and receive the 6th FREE.
EMF Protection is Necessary to Stay Healthy
Mental, emotional, physical and other health-related issues are now being studied as there is growing evidence that microwave radiation and other unseen radiation emissions may have a negative impact on healthy biological systems.
Today’s home and work environments expose us to various forms of electronics which all emit electrical and magnetic fields. With the addition of cell phones, the use of headphones and other devices that people use, the body’s energy field is stressed which shows up as symptoms of fatigue, tiredness, headaches, quick temper, aches, pains and vague symptoms of dis-ease with no specific cause.
EMF Fields are Cumulative
EMF fields are cumulative depending on constitution, duration and distance. The ADR EMF Shield comes as a ceramic disc that is 2 5/8″ (72 mm) in diameter. Place the disc embossed side up. The disc provides a circular protective field with a general coverage of about 1,100 sq. feet (100 sq. meter). However, if the intensity of geopathic radiation is high, several discs will be needed to neutralize, balance or modulate the negative zones.
You may find the services of an experienced dowser to be helpful, or by learning how to dowse yourself. For those that prefer a more scientific approach, the use of various meters such as a Gauss meter or Tri-meter that measures different types of FIELDS can assist you in identifying EMF hot zones.
The ADR Shield disc can also be placed in the fridge, placed close to the power supply (near or under the fuses). This will help protect the vital nutrients of food.
Sometimes the ceramic disc is chipped, but this in no way affects the Shield’s functionality.
IMPORTANT! The ADR Shield should be placed with the embossed side upwards.
The ADR Shield requires no power supply, doesn’t need recharging and has no known negative side-effects, making it maintenance free.
For best results, I recommend using the ADR Protect EMF Personal Protector. Indeed, the ADR EMF Shield works in the environment for home and office, but the ADR Protect provides immediate close-up protection for individuals. This way you have personal protection and when at home gain the benefits of both devices. Furthermore, many people with extreme EMF sensitivity find the combination of the ADR Protect and the ADR Shield especially effective for reducing or eliminating symptoms arising from electro-stress.
Size and Weight of the ADR EMF Shield
2 5/8″ (72 mm)